Fire Alarm Control Panels - Bosch Security Systems

Fire Alarm Control Panels Control Panel Programming | en 65!Warning!Inoperable, unsupervised devices!Be sure the count of devices displayed when this operation completes matches the number ofdevices installed on both buses. Devices not detected during the update bus operation willnot operate and will not be supervised.iNotice!These menu items are allowed only at the local keypad.The following window appears:OPTION BUS (M/M)1 - UPDATE BUS2 - SETUP KEYPDSPress [1] to program the system to update the bus. After you program Update Bus, thefollowing window appears:UPDATE COMPLETETOT BUS DEVS: XThen the previous window appears.Setup keypadsShortcut: 0-PROG, 3-PROG SYSTEM, 4-OPTION BUSThis feature tells the system how many keypads to supervise. It automatically performs anupdate bus operation as it completes.OPTION BUS1 - UPDATE BUS2 - SETUP KEYPDSPress [2] to set up keypads. The following window appears:# OF KEYPADS (__)(0-4):_______Enter the desired value and press [#/Enter]. The existing setting is shown in parentheses onthe first line. After you set up the keypads, the update bus operation proceeds, then theprevious window appears.8.3.4PIN requiredLocalShortcut: 0-PROG, 3-PROG SYSTEM, 5-PIN REQUIRED?A PIN can be required before performing operations. Enter the PIN at the local or built-inkeypad.The following window appears:Bosch Security System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458