Fire Alarm Control Panels - Bosch Security Systems

More documents

Recommendations

Info

98 en | Specifications Fire Alarm Control Panels9SpecificationsiNotice!When a local relay is programmed for trouble it is energized in the normal state. This causesthe common and normally-open terminals to be shorted when not in the trouble condition.ElectricalPower (Input):Power (Auxiliary):120 V 60 Hz or 220 V 50 Hz, 2.2 A24 VDC nominal, unfiltered, 1.0 APower (Initiating Circuit [Smoke]) 1 : 24 VDC nominal, filtered, 1.0 A.Power (Option Bus):Power (Notification Appliance Circuit[NAC]) 2 :Power (Optional Standby Batteries):12 VDC nominal, 500 mAEach NAC has 24 VDC nominal, unfilteredpower with up to 2.5 A capacity (but limitedby overall 4.0 A capacity)Two 12 V (in series), 7 Ah to 40 Ah1For compatible smoke detection devices, see also the FPD‐7024 Smoke DetectorCompatibility List.2For compatible NAC devices, see also the FPD‐7024 NAC Compatibility ListEnvironmentalTemperature (operating and storage):+32°F to +120°F (0°C to +49°C)Notification Appliance Circuits (NACs)Wiring:standard Class B, Style Y or Class A, Style Z as needed.Notification patterns: Configurable for steady, pulsing, California March, ANSI code 3,synchronized Wheelock, synchronized Gentex, and synchronizedSystem Sensor.RelaysLocal (on-board):Remote 1 :The main control panel includes Three Form “C” relays. The relaycontacts are rated at 5 A, 28 VDC. No over existing limiting isperformed on the contacts of these relays. The default selectionfor the relays is to indicate general alarm and general systemtrouble and supervisory. By using point or zone mapping, theycan be programmed to activate in a wide variety of conditions.Eight Form C relay outputs are provided by a D7035 RemoteRelay Module. The module connects to the FPD‐7024 through theoption bus. The outputs are fully programmable, exactly as thelocal relays are programmed. Each output operates independentlyof the other seven to provide complete flexibility. Communicationwith the D7035 is supervised.Contact Rating: 5 A at 28 VDCNumber of Modules: two units maximum.1For wiring requirements, see Option bus wiring requirements, 34.2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.
Fire Alarm Control Panels Appendices | en 991010.1AppendicesAppendix A: Abbreviations on Control Panel DisplayAbbreviation Definition Abbreviation Definition3/1 3/1 Tone Burst (reportingformat)4/2 4/2 Tone Burst (reportingformat)@ Option Bus Address (1 -16)KPAD, KYPAD, KYPDLRelayLOCKeypadLocal RelayLocalACTVTN Activation MACH Answering MachineA, ALRM Alarm M, MONI, MON MonitorALT Alternate NAC Notification ApplianceCircuitANN, ANUN Annunciator NMBR, NUM NumberBAT, BATT, BATTRY Battery NONSUP Non-SupervisoryBX Box (e.g. city box) NORM, NRM NormalCATE Catastrophe OUT OutputCDES, CODS, CDS Codes OVRC OverexistingCMPTR Computer PAS Positive Alarm SequenceCOMM Communicator PHN, PHON PhoneCONFIG Configure PROG, PRGMNG ProgrammingDESCRIPTION Description PRGMMD ProgrammedDIG Digit PT, PNT PointDLY Delay PWR PowerDRL, DRIL Drill REM, REMOT RemoteD, DSBL, DISABL Disable RESPNS ResponseDSPLY Display RLY RelayEE EEPROM RPRT, RPT ReportERelay Expander Relay RST RestoreEXP Expander SIL SilenceFAIL Failure SMK SmokeF, FIR, FR Fire S, SUPERVISORY,SUPRVSRY, SUPV, SPV,SUPVSYSupervisoryFLT Fault SHRT ShortBosch Security System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458
Page 6:
MethodenberichtBerliner pairfam Stu
Page 14 and 15:
14 en | Overview Fire Alarm Control
Page 17 and 18:
Fire Alarm Control Panels Overview
Page 19 and 20:
Fire Alarm Control Panels Overview
Page 22 and 23:
22 en | Installation Fire Alarm Con
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
30 en | Connection Fire Alarm Contr
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
36 en | System Operation Fire Alarm
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49: 48 en | System Operation Fire Alarm
Page 50 and 51: 50 en | Programming Fire Alarm Cont
Page 60 and 61: 60 en | Control Panel Programming F
Page 101 and 102: Fire Alarm Control Panels Appendice
Page 107: Fire Alarm Control Panels Appendice
Page 110 and 111: 110 en | Appendices Fire Alarm Cont
Page 122: Bosch Security Systems, Inc.130 Per
show all

Fire Alarm Control Panels - Bosch Security Systems

Create successful ePaper yourself

Delete template?

Save as template?