MOTOX gearbox - DS TECH

Declaration of Incorporation, Declaration of12Conformity12.1 Declaration of IncorporationDeclaration of Incorporation according to Directive 2006/42/EC Annex II 1 B.The manufacturer Siemens Geared Motors GmbH, 72072 Tübingen, Germany, declares forthe partly completed machine● Single-stage helical gearboxes of typesE.38, E.48, E.68, E.88, E.108, E.128, E.148● Two- and three-stage helical gearboxes of typesD./Z.18, D./Z.28, D./Z.38, D./Z.48, D./Z.68, D./Z.88, D./Z.108, D./Z.128, D./Z.148,D./Z.168, D./Z.188● Parallel shaft gearboxes of typesF.28, F.38B, F.48B, F.68B, F.88B, F.108B, F.128B, F.148B, F.168B, F.188B, F.208● Bevel helical gearboxes of typesB.28, B.38, K.38, K.48, K.68, K.88, K.108, K.128, K.148, K.168, K.188● Helical worm gearboxes of typesC.28, C.38, C.48, C.68, C.88:The special technical documentation was generated according to Annex VII B.The following essential health and safety requirements from Directive 2006/42/EC Annex Iapply and have been fulfilled:● 1.1, 1.1.2, 1.1.3, 1.1.5● 1.2.4.4, 1.2.6● 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.8.1● 1.4.1, 1.4.2, 1.4.2.1● 1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.5.13, 1.5.15● 1.6.1, 1.6.2● 1.7.1, 1.7.1.1, 1.7.2, 1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3The partly completed machine may only be commissioned once it has been established, ifapplicable, that the machine in which the partly completed machine is to be incorporatedmeets the provisions of Directive 2006/42/EC.The manufacturer is obligated to transmit the special technical documentation for the partlycompleted machine in electronic form to national authorities upon legitimate request.Person authorized to compile the relevant technical documentation: Georg Böing, Head ofResearch and Development Gears.Tübingen, April 11, 2011Georg BöingHead of Research & Development GearsJürgen PflaumHead of Quality ManagementBA 2010Operating Instructions, 05/2011 119