MOTOX gearbox - DS TECH

Service and maintenance8.2 Checking and changing lubricants8.2.3 Checking the oil level using the oil sight glass (optional)If you are using an oil sight glass to check the oil level 1, the oil must be visible in thecenter of the sight glass if the oil is cool. If the oil is hot, the oil level 1 is above the center ofthe sight glass. The oil level 1 of cold oil is below the center of the sight glass.Figure 8-4Oil level in the oil sight glassRectify the oil level 1 if necessary and check it again.8.2.4 Checking the oil level using the oil dipstick (optional)To measure the oil level, push the oil dipstick into the hole but do not screw it in.The oil level must be between the lower and upper min.-max. marks on the oil dipstick.If you are using the electric oil level monitoring system, the oil must be level with the uppermax. mark on the oil dipstick.Rectify the oil level if necessary and check it again.BA 2010Operating Instructions, 05/2011 63