MOTOX gearbox - DS TECH

Service and maintenance8.2 Checking and changing lubricants8.2.8 Changing the roller bearing greaseThe roller bearings are filled with a lithium-saponified roller bearing grease at the factoryprior to delivery.Clean the bearing before filling it with fresh lubricant.In the case of the bearings of the output shaft or intermediate shafts the grease quantitymust fill 2/3, and in the case of bearings on the input side 1/3, of the space between thebearing bodies.8.2.9 Changing the oil when using backstops in bevel helical gearboxesThe oil must be changed at the same intervals as the gearbox.Table 8- 3Oil quantity for backstopSize K.88 K.108 K.128 K.148 K.168Oil quantity [l] 0.04 0.06 0.09 0.104 0.44This oil quantity is valid for all gearbox types of construction.1Oil levelFigure 8-5Oil level when using backstops in bevel helical gearboxesFor the standard temperature range from 0 °C to +60 °C, the backstops are filled withKlüber-Summit HYSYN FG68.In the case of ambient temperatures of less than -20 °C and greater than +60 °C, pleasecontact Technical Support.The backstop can also be filled with the oil used in the gearbox.BA 2010Operating Instructions, 05/2011 69