MOTOX gearbox - DS TECH

More documents

Recommendations

Info

Service and maintenance8.9 Inspecting the gearbox or geared motor8.9 Inspecting the gearbox or geared motorCarry out a scheduled inspection of the geared motor once a year in accordance with thepossible criteria listed in Section Auto-Hotspot.Check the geared motor in accordance with the criteria set out in Section Generalinformation and safety notes (Page 7).Touch up damaged paintwork carefully.8.10 Maintenance of the friction clutchNoteCheck the condition of the friction clutch initially after 500 operating hours and then at leastonce yearly and after every blockage of the machine.If necessary, readjust the friction torque or replace the wearing parts, e.g., friction lining andbushes. Friction linings must always be replaced in pairs. We recommend replacing wornbushes in sets.Please refer to the relevant operating instructions for the clutch.BA 201076 Operating Instructions, 05/2011
Disposal 9DANGERIncorrect disposal of used oil is a threat to the environment and health.After use, oil must be taken to a used oil collection point. The addition of foreign materialsuch as solvents and brake and cooling fluid is prohibited.Avoid prolonged contact with the skin.Empty the used oil from the gearbox. The used oil must be collected, stored, transported anddisposed of in accordance with regulations. Do not mix polyglycols with mineral oil.Polyglycols must be disposed of separately.Please observe country-specific laws. Under German law, oils with different disposal codesmay not be mixed with one another to allow optimal treatment of the oil (§4 VI Used Oil).Collect and dispose of used oil in accordance with regulations.Remove oil spillages immediately with an oil-binding agent in compliance with environmentalrequirements.Dispose of the housing parts, gears, shafts, and roller bearings of the geared motor as steelscrap. The same applies to grey cast iron parts, if no separate collection is made.The worm wheels are made partly from non-ferrous metal. Dispose of them accordingly.Dispose of the packing material according to regulations or recycle it.Table 9- 1Disposal codes for gear oilsType of oil Name Disposal codeMineral oil CLP ISO VG220 13 02 05PolyglycolsCLP ISO PG VG22013 02 08CLP ISO PG VG460PolyalphaolefinsCLP ISO PAO VG6813 02 06CLP ISO PAO VG220CLP ISO H1 VG460Biologically degradable oils CLP ISO E VG220 13 02 07BA 2010Operating Instructions, 05/2011 77
Page 1:
MOTOX gearboxBA 2010Operating Instr
Page 4 and 5:
Legal informationLegal informationW
Page 6 and 7:
Table of contents4.3 Tightening tor
Page 8 and 9:
Table of contents12 Declaration of
Page 10 and 11:
General information and safety note
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Technical description2.6 Shaft seal
Page 18 and 19:
Technical description2.9 Rating pla
Page 20 and 21:
Technical description2.10 Surface t
Page 22 and 23:
Technical description2.10 Surface t
Page 24 and 25:
Incoming goods, transport, and stor
Page 26 and 27:
Incoming goods, transport, and stor
Page 28 and 29: Incoming goods, transport, and stor
Page 30 and 31: Installation4.2 General information
Page 32 and 33: Installation4.5 Gearbox with foot m
Page 34 and 35: Installation4.7 Gearbox with C-type
Page 36 and 37: Installation4.8 Mounting the input
Page 38 and 39: Installation4.9 Removing and instal
Page 40 and 41: Installation4.10 Removing and insta
Page 52 and 53: Commissioning5.4 Gearbox with backs
Page 54 and 55: OperationBA 201052 Operating Instru
Page 56 and 57: Faults, causes and remediesFaults C
Page 58 and 59: Faults, causes and remediesFaults C
Page 60 and 61: Service and maintenance8.1 General
Page 62 and 63: Service and maintenance8.2 Checking
Page 76 and 77: Service and maintenance8.5 Cleaning
Page 80 and 81: DisposalBA 201078 Operating Instruc
Page 82 and 83: Technical data10.1 Type designation
Page 84 and 85: Technical data10.2 General technica
Page 86 and 87: Technical data10.4 Sound-pressure l
Page 88 and 89: Technical data10.5 Types of constru
Page 96 and 97: Technical data10.6 Oil quantities10
Page 102 and 103: Technical data10.6 Oil quantitiesTa
Page 108 and 109: Spare parts11.2 Spare parts lists11
Page 114 and 115: Spare parts11.2 Spare parts listsTa
Page 122: Declaration of Incorporation, Decla
show all

MOTOX gearbox - DS TECH

Create successful ePaper yourself

Delete template?

Save as template?