MOTOX gearbox - DS TECH

Incoming goods, transport, and storage3.3 Storage3.3.3 Storage up to 36 months with long-term preservation (optional)CAUTIONThe gearbox is completely filled with operating oil and closed airtight with a plug or bypressure venting with transport fixture.Check the oil level before commissioning.Store the gearbox or geared motor in dry, dust-free, and temperate locations. Specialpacking is then not necessary.Otherwise, the gearbox or geared motor must be packed in plastic film or packed in airtightsealed film and water absorbing agents. Cover them to provide protection against sun andrain.The storage location must be vibration- and shock-free.The free shaft ends, sealing elements and flanges must be coated with a protective layer ofgrease.The life of the corrosion protection is 36 months from delivery.Do not reduce the oil level during short-time startup for 10 minutes in no-load operation.Carry out the following precautionary measures after every period of 6 months in storage:Table 3- 3Preventive actionActionStorage period in months6 12 18 24 30 36Checking the insulation resistance - - x x x xShort-time startup:no-load operation, approximately 10 minutes at ratedvoltage- - x x x xTouch up / re-apply the protective layer of grease - - x x x xCheck the cover and preservation x x x x x xBA 201026 Operating Instructions, 05/2011