MOTOX gearbox - DS TECH

Installation4.10 Removing and installing the shaft-mounted gearbox4.10 Removing and installing the shaft-mounted gearbox4.10.1 General information on installing the shaft-mounted gearboxCAUTIONDamage to shaft sealing rings caused by solvent or benzine.Avoid contact at all times.CAUTIONMisalignment of and stress on the hollow shaft can lead to increased load and cause thebearings to fail.The hollow shaft must be flush with the machine shaft to avoid misalignment.Do not subject the hollow shaft to axial and radial stress.CAUTIONShrink disks:Lubricants in the area between the hollow shaft and machine shaft impair torquetransmission.Keep the bore in the hollow shaft and the machine shaft completely grease-free.Do not use impure solvents and soiled cleaning cloths.NoteCoat the contact surfaces with the mounting paste supplied with the product or any suitablelubricant to prevent frictional corrosion.NoteObserve the permissible concentricity tolerance of the cylindrical shaft end of the machineshaft to the housing axle according to DIN 42955.BA 201038 Operating Instructions, 05/2011