MOTOX gearbox - DS TECH

Service and maintenance8.2 Checking and changing lubricants 123DipstickMarkScrew plugFigure 8-2 Checking the oil level on size 38 gearboxProcedure1. Switch off the power supply to the drive unit.2. Remove the geared motor and set it down as illustrated in the figure. The screw plug 3must be on the top.3. Remove the screw plug 3.4. Make a mark 2 on a suitable dipstick 1.5. Insert the dipstick 1 vertically into the opening until the mark 2 is level with the surfaceof the gearbox.6. Pull the dipstick 1 out vertically.7. Measure the distance "x" on the dipstick 1.8. Compare the value "x" with the value for distance "x".9. Rectify the oil level if necessary and check it again.10. Check the condition of the sealing ring on the screw plug 3 and replace the sealing ringif necessary.11. Seal the gearbox using the screw plug 3.12. Mount the geared motor.You have now checked the oil level in the size 38 gearbox housing.BA 2010Operating Instructions, 05/2011 61