MOTOX gearbox - DS TECH

Service and maintenance8.1 General notes about maintenanceRemedy Interval Description of workCheck the oil quality Every 6 months See Checking the oil quality(Page 64)First oil change aftercommissioningSubsequent oil changesCheck gearbox for leaksClean the gearbox ventilation orreplace if necessaryClean the gearboxCheck the friction clutch andadjust if necessaryAfter approximately10,000 operating hours or at thelatest after 2 yearsEvery 2 years or10,000 operating hours 1)After the first day, thereaftermonthlyDepending on degree of soiling,at least every 6 monthsAfter 500 hours, thereafter oncea year and after every blockageSee Checking and changinglubricants (Page 59)See Checking the gearbox forleaks (Page 73)See Cleaning the vent filter(Page 74)See Cleaning the gearbox(Page 74)See Maintenance of the frictionclutch (Page 76)Check the coupling For the first time after 3 months Please refer to the separateoperating instructionsCarry out a complete inspectionof the geared motorCheck that fastening bolts ongearboxes and built-onaccessories are securelytightened. Check that coversand plugs are securely fastenedChange the roller bearinggreaseEvery 12 monthsAfter 3 hours, regularlythereafterWhen the oil is changedSee Inspecting the gearbox orgeared motor (Page 76)See Checking tightness offastening bolts (Page 75)See Changing the roller bearinggrease (Page 69)Replace bearings - See Replacing bearings(Page 73)Check rubber buffers on torquearmsEvery 6 monthsSee Torque arms with shaftmountedgearboxes (Page 46)1) When using synthetic oils, the intervals can be doubled. The data specified is valid for an oiltemperature of +80 °C. See the figure titled "Guide values for oil change intervals" for oil changeintervals for other temperatures.BA 201058 Operating Instructions, 05/2011