MOTOX gearbox - DS TECH

Installation4.10 Removing and installing the shaft-mounted gearbox4.10.3 Shrink disk4.10.3.1 Mounting the shrink diskDANGERRisk of injury due to freely rotating parts.Fit a cover cap or protection cover.CAUTIONThe shrink disk is delivered ready for installation.Do not dismantle the shrink disk before initial fitting.CAUTIONLubricants in the area of the shrink disk seat impair torque transmission.Keep the bore in the hollow shaft and the machine shaft completely grease-free.Do not use impure solvents and soiled cleaning cloths.CAUTIONPlastic deformation of the hollow shaft when tightening the tightening bolts before fitting themachine shaft.First fit machine shaft. Then tighten the tightening bolts.CAUTIONAvoid overloading the individual bolts.Do not exceed the maximum tightening torque for tightening bolt.Size 28:Tighten tightening bolts 3.Sizes 38 - 208:The alignment of the end faces of outer ring 1 and inner ring 2 has priority. If thisalignment is not achieved when tensioning, the tolerance of the insert shaft must bechecked.BA 2010Operating Instructions, 05/2011 43