MOTOX gearbox - DS TECH

Technical description2.10 Surface treatment2.10.2 Painted versionThe corrosion protection system is classified according to the corrosiveness categories inDIN EN ISO 12944-2.Table 2- 2Paint according to corrosiveness categoriesPaint systemDescriptionCorrosiveness category C1 paint for normal environmental stressDip primer Indoor installation1-component hydro paint Heated buildings with neutral atmospheres Resistance to greases and some resistance tomineral oils, aliphatic solvents Standard paintCorrosiveness category C2 paint for low environmental stressDip primer2-component polyurethane top coatIndoor and outdoor installationUnheated buildings with condensation, productionareas with low humidity, e.g. warehouses andsports facilitiesAtmospheres with little contamination, mostly ruralareasResistance to greases, mineral oils and sulfuricacid (10 %), caustic soda (10 %) and someresistance to aliphatic solventsCorrosiveness category C3 paint for medium environmental stressDip primer2-component polyurethane base coat2-component polyurethane top coatIndoor and outdoor installationProduction areas with high humidity and some aircontamination, e.g. food production areas, dairies,breweries and laundriesUrban and industrial atmospheres, moderatecontamination from sulfur dioxide, coastal areaswith low salt levelsResistance to greases, mineral oils, aliphaticsolvents, sulfuric acid (10 %), caustic soda (10 %)BA 201018 Operating Instructions, 05/2011