MOTOX gearbox - DS TECH

Disposal 9DANGERIncorrect disposal of used oil is a threat to the environment and health.After use, oil must be taken to a used oil collection point. The addition of foreign materialsuch as solvents and brake and cooling fluid is prohibited.Avoid prolonged contact with the skin.Empty the used oil from the gearbox. The used oil must be collected, stored, transported anddisposed of in accordance with regulations. Do not mix polyglycols with mineral oil.Polyglycols must be disposed of separately.Please observe country-specific laws. Under German law, oils with different disposal codesmay not be mixed with one another to allow optimal treatment of the oil (§4 VI Used Oil).Collect and dispose of used oil in accordance with regulations.Remove oil spillages immediately with an oil-binding agent in compliance with environmentalrequirements.Dispose of the housing parts, gears, shafts, and roller bearings of the geared motor as steelscrap. The same applies to grey cast iron parts, if no separate collection is made.The worm wheels are made partly from non-ferrous metal. Dispose of them accordingly.Dispose of the packing material according to regulations or recycle it.Table 9- 1Disposal codes for gear oilsType of oil Name Disposal codeMineral oil CLP ISO VG220 13 02 05PolyglycolsCLP ISO PG VG22013 02 08CLP ISO PG VG460PolyalphaolefinsCLP ISO PAO VG6813 02 06CLP ISO PAO VG220CLP ISO H1 VG460Biologically degradable oils CLP ISO E VG220 13 02 07BA 2010Operating Instructions, 05/2011 77