MOTOX gearbox - DS TECH

Installation4.10 Removing and installing the shaft-mounted gearbox4.10.4.3 Mounting torque arms on bevel helical gearboxes and helical worm gearboxesDANGERThe torque arm bush must be supported by bearings on both sides.Figure 4-13Mounting suggestion for torque arm on footFigure 4-14Mounting suggestion for torque arm on flangeThe torque arm can be fitted in various positions, depending on the hole circle pitch.Procedure1. Clean the contact surfaces between the housing and the torque arm.2. Tighten the bolts with the specified torque.You have now mounted the torque arm.Table 4- 5Tightening torque for bolt of strength class 8.8 if torque arm is mountedThread size M8 M10 M12 M16 M20 M24 M30Tightening torque [Nm] 25 50 90 210 450 750 1,500BA 201048 Operating Instructions, 05/2011