MOTOX gearbox - DS TECH

Declaration of Incorporation, Declaration of Conformity12.2 EC Declaration of Conformity12.2 EC Declaration of ConformityDocument no. D87.1 09.10Equipment designation:Gearbox series MOTOXGearbox types:E, Z, D, F, K, CSizes: 38 to 208Input units:A, K, PThe designated equipment conforms to the requirements of Explosion ProtectionDirective 94/9/EC, ATEX 95. It has been developed and manufactured in compliance withthe following European standards: DIN EN ISO 14121-1 DIN EN 13463-5 DIN EN 1127-1 DIN EN 13463-6 DIN EN 13463-1 DIN EN 13463-8Type of explosion protection for equipment group II or categories 2 and 3: II2 G / D IIB ck T4 / 120 °C II2 G / D IIC ck T4 / 120 °C II2 G / D IIB bck T4 / 120 °C II2 G / D IIC bck T4 / 120 °C II3 G / D IIB ck T4 / 120 °C II3 G / D IIC ck T4 / 120 °CThe specific marking of the gearbox is noted on the rating plate.EC Declarations of Conformity and / or EC-type examination certificates for furtherequipment added to the gearbox and / or for safety systems are enclosed. These may bespecifically:● Rotating electrical machines● Safety systems for oil level and / or temperature monitoring equipmentThe technical documentation for category 2 gearboxes has undergone voluntary inspectionand has been filed with the designated body under no. 0123, TÜV SÜD PRODUCTSERVICE GmbH, Ridlerstraße 65, 80339 München.Initial release: 01.10.2009Tübingen, September 23, 2010Georg BöingHead of Research & Development GearsJürgen PflaumHead of Quality ManagementBA 2010120 Operating Instructions, 05/2011