MOTOX gearbox - DS TECH

More documents

Recommendations

Info

Technical data10.4 Sound-pressure level10.4 Sound-pressure levelThe A rated sound-pressure level LWA of a selection of gearboxes in the following figure hasbeen measured to DIN EN ISO 1680 with meters to DIN IEC 60651.The noise depends mainly on speed, output, and transmission ratio. Figure 10-3MOTOX geared motors sound-pressure levelThe sound-pressure levels of MOTOX geared motors fall mainly in the dark-colored part ofthe range. Gearboxes with very small transmission ratios, high output, and high input speedmay fall into the cross-hatched part.If repeat measurements on site do not produce conclusive results which can be verified bymeasuring technology, the measurement obtained on the Siemens Geared Motors GmbHtest benches will apply.External noisesNoises not generated by the gearbox but emitted from it are not taken into considerationhere.Similarly, noises emitted from the input and output machines and from the foundation are nottaken into consideration here, even if transmitted to these by the gearbox.BA 201084 Operating Instructions, 05/2011
Technical data10.5 Types of construction10.5 Types of constructionThe type of construction designations are compliant with IEC 60034-7 (Code I).The gearbox must be operated only in the type of construction specified on the rating plate.This ensures that the correct quantity of lubricant is provided.NoteGearbox sizes 18 and 28 are lubricated for life.Screw plugs are not provided.Explanation of symbols in type of construction diagrams:Ventilation Oil filling Oil level Oil dipstick Oil drainA, B Position of insert shaft / solid shaftV Gearboxes of size 38 are fitted as standard with a screw plug at point "V";ventilation is not required.* On opposite side2 Two-stage gearbox3 Three-stage gearbox4 Tandem gearbox5 Optional oil hole facing output side- - - AlternativelyBA 2010Operating Instructions, 05/2011 85
Page 1:
MOTOX gearboxBA 2010Operating Instr
Page 4 and 5:
Legal informationLegal informationW
Page 6 and 7:
Table of contents4.3 Tightening tor
Page 8 and 9:
Table of contents12 Declaration of
Page 10 and 11:
General information and safety note
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Technical description2.6 Shaft seal
Page 18 and 19:
Technical description2.9 Rating pla
Page 20 and 21:
Technical description2.10 Surface t
Page 22 and 23:
Technical description2.10 Surface t
Page 24 and 25:
Incoming goods, transport, and stor
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Installation4.2 General information
Page 32 and 33:
Installation4.5 Gearbox with foot m
Page 34 and 35:
Installation4.7 Gearbox with C-type
Page 36 and 37: Installation4.8 Mounting the input
Page 38 and 39: Installation4.9 Removing and instal
Page 40 and 41: Installation4.10 Removing and insta
Page 52 and 53: Commissioning5.4 Gearbox with backs
Page 54 and 55: OperationBA 201052 Operating Instru
Page 56 and 57: Faults, causes and remediesFaults C
Page 58 and 59: Faults, causes and remediesFaults C
Page 60 and 61: Service and maintenance8.1 General
Page 62 and 63: Service and maintenance8.2 Checking
Page 76 and 77: Service and maintenance8.5 Cleaning
Page 78 and 79: Service and maintenance8.9 Inspecti
Page 80 and 81: DisposalBA 201078 Operating Instruc
Page 82 and 83: Technical data10.1 Type designation
Page 84 and 85: Technical data10.2 General technica
Page 88 and 89: Technical data10.5 Types of constru
Page 96 and 97: Technical data10.6 Oil quantities10
Page 102 and 103: Technical data10.6 Oil quantitiesTa
Page 108 and 109: Spare parts11.2 Spare parts lists11
Page 114 and 115: Spare parts11.2 Spare parts listsTa
Page 122: Declaration of Incorporation, Decla
show all

MOTOX gearbox - DS TECH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?