MOTOX gearbox - DS TECH

Installation4.6 Gearboxes in foot or flange version4.6 Gearboxes in foot or flange versionCAUTIONDo not subject gearbox housings to overstress from add-on elements on the foot or flange.Add-on elements must not transmit forces, torques and vibration to the gearbox.The gearbox must be fastened for force and torque transmission only to either the flange orthe foot mounting to prevent overstress on the gearbox housing, see Gearbox with footmounting (Page 30).The second mounting option (foot or flange) is intended for add-on elements, e.g. protectioncovers with an intrinsic weight of up to max. 30 % of the weight of the gearbox.4.7 Gearbox with C-type housing flangeIn the case of sizes 108 to 188, the customer's interface can be pinned on theC-type housing flange. The output flange has been designed to ensure the reliabletransmission of the permissible torque and radial force by the bolt connections.For additional fastening, e.g. in the case of high shock loads, the existing drilled pin holescan be used.The gearboxes can also be drilled and pinned together with the machine. Compliance withthe listed dimensions is mandatory in this case.BA 2010Operating Instructions, 05/2011 31