ACS WebService Administrator Manual - Brivo Systems

Page 147Figure 87.Define a DoorTo define a door:1. The Door Name and Control Panel fields cannot be edited on the Define Doorpage.2. Click a Door Board/Node combination from the Board and Node dropdown list.Only valid, available combinations are listed. If the door you are configuring is aSalto door, select the Salto Router from the Board and Node dropdown list.Additional instructions for configuring a Salto Door are found below.3. In the Door Ajar Enabled field, click Yes or No to indicate if you want to enablethe Door Ajar feature. This feature controls how long a door can be left proppedor held open before it is considered a security risk, causing the event to berecorded in the Activity Log and an optional email notification to be sent. Thedefault setting is Yes.4. If the Door Ajar feature is enabled, use the Door Ajar Threshold field to indicatethe maximum length of time (30-600 seconds) the door can be left ajar withoutcausing a security violation. The default setting is 120.5. In the Invalid PINs Threshold field, enter the maximum number of consecutiveinvalid PINS that can be entered in the door’s keypad (1-10) before it isconsidered a security risk and the keypad freezes. The default setting is 3.6. In the Invalid PINs Shutdown field, indicate the length of time (10-600 seconds)the keypad should remain frozen if the maximum number of invalid PINs isexceeded. The default setting is 120.