ACS WebService Administrator Manual - Brivo Systems

Page 234To delete an OVR camera:1. From the Setup tab, click on the Video tab, then choose the OVR Cameras tab.The OVR Camera list page appears.2. Click on the trash can icon next to the camera you would like to delete. A popupwarning appears, asking if you are sure you want to delete the camera.3. Click OK. You are returned to the View Camera page.NOTE:A camera cannot be deleted unless it is listed as Connected under CameraStatus. If the camera is listed as Disconnected, please contact Brivo TechnicalSupport for further assistance in deleting your camera from the system.Camera Connection StatusConnected: the camera is connected to AVHS.Disconnected: the camera is no longer visible to AVHS. This could be the result of apower failure, lack of network connection, etc.To view live video from an OVR camera:1. From the Setup tab, click on the Video tab, then choose the OVR Cameras tab.The OVR Camera list page appears.2. Click on the camera icon next to the camera you would like to view. A popupwindow appears displaying the live video feed from that camera.NOTE:Only one instance of live video can be viewed at a time.To view activity-based playback from an OVR camera:1. From the Activity tab, click on the Activity Log tab. The Activity Log displays.2. Next to the event for which you would like to view video, click the video cameraicon. Video will appear in the Video Playback box only if the event’scorresponding device is associated with an OVR camera and will also display thesubsequent two following clips. Otherwise, a popup window will appear todisplay the video linked to a DVR camera.