ACS WebService Administrator Manual - Brivo Systems

Page 2753. Enter the proxy server IP Address, the Port number for accessing the proxyservices, the Username for the control panel, and the Password for the controlpanel.4. After entering the data, click Accept.Configuration using Windows ISA Proxy Server, using the SOCKS5 protocol:5. Use a laptop to log into the admin interface of the ACS-5000-E panel.6. Click on Networking and then Proxy Server.7. Configure a static IP address on the control panel (whatever the network admindeems appropriate). This should be an internal (NAT) address. No need for aroutable (public) address.8. On the ISA system, configure an OUTBOUND rule for this new static address.9. This OUTBOUND rule should allow communication from the panel's static IPaddress to c2.brivo.com on port 443.10. Please note that this is for OUTBOUND communications only; Brivo does notneed inbound access to the panel.