ACS WebService Administrator Manual - Brivo Systems

Page 28412. Answer affirmatively. This action will cause the DVR to install the new firmwareversion and will result in the restart of the DVR.13. Upon the successful restart, the DVR will be ready for use with ACS WebService.Configuration Notes and LimitationsThe following limitations and guidelines should be considered when configuring a Speco DVRin ACS WebService:The URL must be specified in the form of http://:portDVR name or IP address>:port. By default, Speco DVRs use port 100 for HTTPcommunication. Therefore, the URL for Speco DVRs using the default configuration wouldbe http://:port name or IP address>:100.N.B. Please consult the DVR’s documentation to change the port for HTTP configuration.Do not specify an administrative-level user account (typically named “admin”) in theconfiguration of the DVR as it permits only one (1) concurrent connection. Instead, select auser-level account (typically named “user”) which permits up to four (4) concurrentconnections.N.B. Speco DVRs permit a maximum of four (4) concurrent connections.Playback controls for time-based playback (i.e. rewind, play, pause, and fast forward) arenot currently supported. They may be supported in a future release.N.B. Speco DVRs do not support these operations for live playback.