ACS WebService Administrator Manual - Brivo Systems

Page 163Managing ElevatorsConfiguring a control panel includes managing the elevators linked to that control panel.To add an elevator to a control panel:1. From the Setup dropdown menu, choose the Sites/Doors tab then click theControl Panels tab. The Control Panels directory displays.2. Click the control panel to which you wish to add an elevator. The Control Paneldetail page displays.3. Click Add Elevator. The Add Elevator page displays.Figure 98.Add an Elevator to a Control PanelNOTE:In order to add an elevator to a control panel, there must be anexisting site and an available card reader with which to associate theelevator. Otherwise, you will receive an error message when youaccess the Add Elevator page.4. In the Elevator Name field, enter a short, descriptive name for the elevator,such as “Main Lobby.”5. On the Reader dropdown list, click a card reader with which to associate theelevator. All available readers are listed.6. In the Pulse Time field, enter the number of seconds (1-600) you want a floorselection to remain available after a card is flashed at or passed through thereader. The default is 10.