ACS WebService Administrator Manual - Brivo Systems

Page 1502. In the Pass-through Period field, enter the maximum length of time (1-600seconds) the door should remain unlocked after a user presents his or hercredentials and is authenticated or presses a Request-to-Exit switch. Forexample, if this value is set to 15, the user has 15 seconds to pass through thedoor before it automatically re-locks. The default setting is 5.3. In the Door Unlock Schedule field, click a schedule from the dropdown list if youwant the door to remain unlocked for pre-specified periods of time.4. In the Control from Browser field, click Yes or No to indicate if you want toenable the Control from Browser feature to allow Unlock Door to function.Figure 88.Define a Salto Door5. Click Save. The Door detail page displays.NOTE:The control panel firmware must be version 5.0.19 or later for theSalto Wireless Door feature to function. If the control panel hasfirmware version 5.0.18 or earlier, the Salto Wireless Door feature isnot available.To edit a door:1. From the Setup dropdown menu, choose the Sites/Doors tab then click the SiteDirectory tab. The Site Directory displays.2. Click the site for which you want to edit a door. The Site detail page displays.3. Click the door you want to edit. The Door detail page displays.4. Click Edit Door. The Edit Door page displays.