ACS WebService Administrator Manual - Brivo Systems

Page 444. If your doors have card readers and you would like to:5. Assign ONE card to a user: enter a card number in the blank field next to Card#, or click Select ... to view a popup list of all currently unassigned cards.6. Assign MULTIPLE cards to a user: enter a card number in the blank field next toCard # and click Add, adding up to 16 cards for that user. You may also clickSelect ... to view a popup list of all currently unassigned cards.NOTE:It is possible to manually enter a card number in the Card # field.However, if the card is not listed in the Card Bank, or if there aremultiple cards with the number you entered, you must chooseSelect… to specify which card has the corresponding facility code youwould like to add.Figure 19.Select CardNOTE:If any of the doors or elevators to which this user will have accessuses two-factor credentials, you must enter both a PIN and a Card #.