ACS WebService Administrator Manual - Brivo Systems

Page 281; This line defines the number of days to wait between each update -; default is 1; Freq=1; This is the date and time of the last update and will normally; be updated by the program; Lasttime=06/09/02 13:18:335. In the tenth line, replace the text [server1.net1.pridomain] with the IPaddress or DNS name of the DVR and remove the leading ; character.6. In the thirteenth line, replace the text SyncTime=13:00 with the time atwhich you want to synchronize the DVR and your Brivo control panel(s), andremove the leading ; character.7. In the sixteenth line, replace the text Freq=1 with the number of daysbetween each update, and remove the leading ; character. It is generally bestto leave this value as 1.8. In the last line, remove the leading ; character.9. Click Save, then Close the text edit window.10. Right-click on the grid in the DVIP Time Sync V0.3 window and click Reload Liston the popup men. The DVR IP address or DNS name should appear in the grid.11. Close the DVIP Time Sync V0.3 application window.To schedule the execution of the time synchronization utility:1. Open the Windows Start menu.2. Click All Programs or Programs, depending on your operating system.) ThePrograms popup menu displays.3. Click Accessories. The Accessories popup menu displays.4. Click System Tools. The System Tools popup menu displays.5. Click Scheduled Tasks. The Scheduled Tasks window opens.NOTE:For Microsoft® Windows NT, the location will be slightly different:Click on the My Computer icon, and then click Scheduled Tasks. TheScheduled Tasks window opens.6. Double-click Add Scheduled Task. The Scheduled Task Wizard beings running.7. Click Next.8. On the next screen, click Browse, and select the DVIPSync.exe from thedirectory to which it was saved in step 2 of the procedures for installing theDedicated Micros time synchronization utility above.9. On the next page, enter a descriptive name for the task, click the Daily radiobutton, and then click Next.