ACS WebService Administrator Manual - Brivo Systems

Page 2862. Once you have installed the driver and service pack, login to the WebServiceapplication and add the DVR according to the instructions in Adding a DVR.3. When configuring a Pelco DVR for WebService, users must keep in mind thatthe DVR IP address is assigned by the customer's network administration; theURL specified must be an IP address and not a host name, enteredas http://:9002, where is the valuespecified in the Pelco DVR manual.4. Viewing footage on a Pelco DVR requires the viewer to enter a specific username and password per DVR on that account. If a user has more than one PelcoDVR on an account, the user must have separate login information per DVR.Additionally, only one user may enter a given username and password at a timeto view live video, and the user accounts on the DVR must be created in the“Power User Group.” For more information on login names, please refer to thePelco DVR manual or your system administrator.5. The Network Time Protocol (NTP) must be configured on the DVR. Instructionsfor configuring NTP are available in the DVR manual.