ACS WebService Administrator Manual - Brivo Systems

Page 1647. In the Sites field, identify the site(s) at which this elevator operates. By default,no sites are selected. To select a site:8. In the left-hand box, click the site you wish to associate with the elevator.9. Click Add a site. The site name now appears in the right-hand box.10. Repeat for each site you wish to associate with the elevator.11. On the Two Factor Schedule dropdown list, click the schedule during which youwant this elevator to require two credentials. During the selected time period,users with privileges at this elevator will need to scan a security card and entera PIN to gain access.12. In the Two Factor Interval field, enter the amount of time (3-60 seconds) theuser will have to present both credentials. If the user takes more than theallotted time, access will be denied.13. Click Save. The Elevator detail page displays.Figure 99.View Elevator DetailsTo edit an elevator:1. From the Setup dropdown menu, choose the Sites/Doors tab then click theControl Panels tab. The Control Panels directory displays.2. Click the control panel for which you wish to edit an elevator. The Control Paneldetail page displays.3. Click the elevator you wish to edit. The Elevator detail page displays.4. Click Edit Elevator. The Edit Elevator page displays.