ACS WebService Administrator Manual - Brivo Systems

Page 265Setting Up an Enrollment StationSetting up a fingerprint enrollment station takes only a few minutes. The enrollment processrequires:A Bioscrypt V-Smart readerA PC with a serial portA standard MIFARE contactless smart card for each enrolled userMicrosoft Windows with Internet Explorer 5.0 or higherMacromedia® Flash Player 5.0 or higher*To set up a fingerprint enrollment station:1. Assemble the Bioscrypt V-Smart reader according to its assembly instructions.2. Connect the serial plug to an open serial port on your PC. Make sure noapplications (e.g. “Hot Sync” programs) are using, or attempting to use, theserial port.3. Plug in the power supply.4. Follow the procedures for editing a user.5. The first time you open the enrollment interface, you will be prompted todownload the enrollment software. Click Yes at the prompt.