Guidelines for care & Use of Dry Solvent Stills [Example]
Guidelines for care & Use of Dry Solvent Stills [Example]
Guidelines for care & Use of Dry Solvent Stills [Example]
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
12. Dr. N<strong>of</strong>tle – Lab Room # 118<br />
SPECIFIC PROCEDURES FOR SAFE REMOVAL OF HIGHLY TOXIC WASTE<br />
Consult with your research advisor concerning proper methods <strong>for</strong> packaging and storing extremely<br />
hazardous waste. Research usually involves working with selective types or classes <strong>of</strong> chemicals. Prepare<br />
brief summaries in this section <strong>for</strong> handling spent chemicals peculiar to your lab.<br />
The following common laboratory organic solvents can be collected in a waste container, labeled<br />
NON- SULFUR, NON-HALOGENATED ORGANIC SOLVENTS and be poured into one <strong>of</strong> the two 55<br />
gallon waste drums located in the solvent room, #20, assuming they are not overly contaminated with acids<br />
or large amounts <strong>of</strong> toxic or odoriferous sulfur compounds. Each chemical should be recorded by name<br />
and amount.<br />
acetone methyl ethyl ketone pump oil<br />
benzaldehyde mineral spirits tetrahydr<strong>of</strong>uran<br />
benzene motor oil toluene<br />
cyclohexane naphtha xylenes<br />
ethyl ether paint thinner ethyl alcohol, (and,<br />
ethyl acetate petroleum ether low-molecular weight alcohols,<br />
The methylene chloride and chloro<strong>for</strong>m must be collected in a well-labeled waste bottle and can be poured<br />
into labeled 20 liter empty white polyethylene containers kept next to the large 55 gallon steel drum on the<br />
floor in the wide yellow spill tray in the solvent room, #20. Sulfur containing compounds, complex<br />
heterocyclics, corrosives, organic acids, lachrymators, etc. (i.e. thiophene, pyrrole, acetonitrile, etc.)<br />
should be collected into well-labeled waste bottles and taken to the metal surface in the solvent room, #20.<br />
Consolidate compatible inorganic solids in a well-labeled waste container, organic solids in another.<br />
These can be placed on the metal surface table in the solvent room #20. Non-compatible solids should<br />
naturally be packaged separately.<br />
Typical waste streams originating from Dr. N<strong>of</strong>tle’s research lab are as follows:<br />
Organic <strong>Solvent</strong>s (Non-Halogenated)<br />
Ethyl Acetate, Hexanes, Acetone<br />
Diethyl Ether, Methanol, Ethanol<br />
Tetrahydr<strong>of</strong>uran, Toluene, Pentane<br />
Cyclohexane, Benzene, Acetonitrile, and occasionally Nitrobenzene<br />
Halogenated <strong>Solvent</strong>s<br />
Methylene chloride, chloro<strong>for</strong>m<br />
Acetone, with:<br />
tetrabutylammonium perchlorate tetrabutylammonium hexafluorophosphate<br />
tetrabutylammonium trifluoromethanesulfonate<br />
copper(II) perchlorate hexahydrate copper(II) trifluoromethanesulfonate<br />
copper(II) acetate monohydrate copper(II) chloride<br />
zinc(II) perchlorate hexahydrate zinc(II) trifluoromethanesulfonate<br />
N2-(2-pyridylmethyl)-3-thienyl carboxamide<br />
N2-(2-pyridylmethyl)-3-thenyl carboxamide<br />
N2-(2-pyridylmethyl)-5-(3-thienyl)-butyl carboxamide<br />
N2-(2-pyridylmethyl)-trans-3-(3-thienyl) acrylamide<br />
84