User's Manual - Cornell Lab of Ornithology - Cornell University

Chapter 6: MeasurementsCommentsSelecting Add Comment... from the DataLog menu brings up a dialog box thatlets you enter a text comment to be appended to the DataLog window (Figure6.4). When you click OK, whatever text you entered in the dialog box isappended to the log, following the last measurement entry already recorded.Subsequent entries are added after the comment. In Figure 6.3, for example,comments are used to identify the two sets of data from the waveform andspectrogram panes.Figure 6.4. The Add Comment dialog box.Selecting Signal Parameters... from the DataLog menu brings up the AddComment dialog box and automatically enters the parameter values displayedon the measurement panel into the text box (Figure 6.5). Clicking OK appendsthe parameters to the log as a comment.Figure 6.5. The Signal Parameters... command from the DataLog menuautomatically fills in the text entry box of the Add Comment dialog box with theparameters displayed by the measurement panel.102 Canary 1.2 User’s Manual