1771-6.5.132, PLC-5 DeviceNet Scanner User Manual

3-4 Hardware SetupTo go online to the PLC-5 processor via Data Highway Plus:1. Define the DH+ station address of channel 1A by setting switchassembly SW-1 on the back of the processor. For the exampleapplication we used address 1. (Set switch 4 in the up position, andswitches 1, 2, 3, 5, and 6 in the down position.)TIPSee the information on the side of the processor ifyou want to use another address.back view of processorSwitch 4 in the “up” positionside viewdownupSwitch 7 in the “up” position.2. Set the baud rate to 57.6 Kbaud by placing switch 7 in the upposition.MoreSee Appendix C for information on installing and configuring the DataHighway Plus driver.Publication 1771-6.5.132 - June 2000