1771-6.5.132, PLC-5 DeviceNet Scanner User Manual

More documents

Recommendations

Info

5-18 Communicating with DeviceNet from Another NetworkCommunicating withDeviceNet from a DH+NetworkBefore performing this example the DH+ network must be configuredand running. In this example, the PLC-5 processor’s DH+ channel A isconfigured as node 1. Use your own DH+ configuration whenperforming this example.Configuring the DeviceNet Pass-Through DriverBefore you can communicate with the 1771-SDN module via a DH+network, you must first configure the DeviceNet pass-through driver(1771-SDNPT) with a DH+ port. RSLinx, version 2.10 or higher, isrequired.Perform the following steps.1. Start RSLinx.2. From the Communications menu, select Configure Drivers.The Configure Drivers window will appear.3. Select DeviceNet Drivers from the Available Driver Typespull-down list and click on Add/New.Publication 1771-6.5.132 - June 2000
Communicating with DeviceNet from Another Network 5-19You will see the following list of drivers.4. Select the Allen-Bradley 1771-SDNPT driver.The Driver Configuration window will appear.5. Select a pass-through port to be configured from the pull-down list,e.g., Port 3.6. Expand your DH+ driver (AB_KT-1 above) and highlight the PLC-5processor.7. Select the 1771-SDN Backplane Address Configuration. Weused the following configuration for the example application.Rack 0Group 1Slot 08. Select the DeviceNet Channel (Channel 1 for the exampleapplication).Publication 1771-6.5.132 - June 2000
Page 1 and 2:
PLC-5 DeviceNetScanner Module1771-S
Page 3:
European Communities (EC)Directive
Page 6 and 7:
P-2 About This User ManualContentsT
Page 8 and 9:
P-4 About This User ManualCommon Te
Page 10 and 11:
P-6 About This User ManualTerminolo
Page 12 and 13:
P-8 About This User ManualPublicati
Page 14 and 15:
Table of ContentsiiConfiguring theD
Page 16 and 17:
Table of ContentsivPublication 1771
Page 18 and 19:
1-2 Before You BeginWhat Your 1771-
Page 20 and 21:
1-4 Before You BeginThe 1771-SDN sc
Page 22 and 23:
1-6 Before You BeginCommunicating w
Page 24 and 25:
1-8 Before You BeginWhat 1771-SDN M
Page 26 and 27:
1-10 Before You BeginThe configurat
Page 28 and 29:
1-12 Before You BeginPublication 17
Page 30 and 31:
2-2 Planning Your Configuration and
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39: 2-10 Planning Your Configuration an
Page 40 and 41: 3-2 Hardware SetupInstalling the PL
Page 42 and 43: 3-4 Hardware SetupTo go online to t
Page 44 and 45: 3-6 Hardware Setup3. Insert the int
Page 46 and 47: 3-8 Hardware SetupSetting the Chann
Page 48 and 49: 3-10 Hardware SetupConnecting the S
Page 50 and 51: 3-12 Hardware SetupInstalling theSe
Page 52 and 53: 3-14 Hardware SetupPublication 1771
Page 54 and 55: 4-2 Configuring the DeviceNet Netwo
Page 62 and 63: 4-10 Configuring the DeviceNet Netw
Page 72 and 73: 5-2 Communicating with DeviceNet fr
Page 80 and 81: 5-10 Communicating with DeviceNet f
Page 96 and 97: 6-2 Creating and Running the Exampl
Page 104 and 105: 6-10 Creating and Running the Examp
Page 110 and 111: 7-2 TroubleshootingNetwork Status I
Page 112 and 113: 7-4 TroubleshootingNumericCodeDescr
Page 114 and 115: A-2 1785-ENET Module Channel Config
Page 116 and 117: B-2 Installing and Configuring the
Page 118 and 119: B-4 Installing and Configuring the
Page 120 and 121: C-2 Installing and Configuring the
Page 122 and 123: C-4 Installing and Configuring the
Page 124 and 125: D-2 Data Map ExampleExample Framewo
Page 126 and 127: D-4 Data Map ExampleIn 1-slot addre
Page 128 and 129: D-6 Data Map ExampleExample OutputM
Page 130 and 131: D-8 Data Map ExampleThe following i
Page 132 and 133: D-10 Data Map ExamplePublication 17
Page 134 and 135: 2 Indexsetting the I/O chassis back
Page 136: ( )Other CommentsPLEASE FOLD HERENO
Page 139:
PLC-5 DeviceNet Scanner Module User
show all

1771-6.5.132, PLC-5 DeviceNet Scanner User Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?