1771-6.5.132, PLC-5 DeviceNet Scanner User Manual

Chapter 4Configuring the DeviceNet NetworkWhat This Chapter ContainsThis chapter describes how to configure the DeviceNet network usingRSLinx and RSNetWorx for DeviceNet software. The following tabledescribes what this chapter contains and where to find specificinformation.For information aboutSee pageInstalling the Software 4-1Using RSLinx to Configure the DeviceNet Driver 4-2Using RSNetWorx for DeviceNet to Configure the Scanlist 4-4Setting Up an Online Connection 4-4Setting the 1771-SDN Node Address 4-6Configuring the I/O Devices 4-9Verifying the Photoeye Configuration 4-12Verifying the RediSTATION Configuration 4-13AutoMapping the Devices into the Scanlist 4-14Installing the SoftwareInstall the RSLinx and RSNetWorx software.1. Insert the CD in the CD-ROM drive.Note: The CD-ROM supports Windows Autorun. Once inserted intothe CD-ROM drive, if you have Autorun configured, the installationwill automatically start at the first setup screen.If Autorun is not configured for your CD-ROM drive, go to step 2.2. From the Start menu, choose Run.You will see the Run pop-up window.3. Type d:/setup (if it doesn’t appear automatically), where d: is yourCD-ROM driver letter.4. Click on OK.You see the progress bar, followed by the welcome screen.1 Publication 1771-6.5.132 - June 2000