user manual - Utax

Basic OperationOriginal PreviewYou can display a preview image of the scanned document on the panel.NOTE: To view a preview of an image stored in a Custom Box, refer to Previewing Documents/CheckingDocument Details on page 3-49.The procedure described here is for copying a single-page original.The procedure for previewing scanned originals is explained below.1 Press the Copy key and place the original on theplaten.Copies2 Press [Preview].Copy ImageShortcut 1Place original.Shortcut 2Shortcut 3OriginalZoomPaper:::A4 : ---100% : 100%A4 : ---PreviewAutoPaperSelection1-sided>>1-sidedDuplex100%ZoomOffCombineNormal 0DensityStaple/PunchShortcut 4Shortcut 5Shortcut 6Quick Setup Org./Paper/FinishingColor/Image QualityLayout/Edit AdvancedSetupProgramStatus 10/10/2010 10:10OriginalZoomPaperPress Start key to start printing.Press [Cancel] to change settings.Copy Image: A4: 100%: A4CancelAutoPaperSelection1-sided>>1-sidedDuplex100%ZoomOffCombineOffNormal 0DensityStaple/PunchCopiesShortcut 1Shortcut 2Shortcut 3Shortcut 4Shortcut 5Shortcut 6Quick Setup Org./Paper/FinishingColor/Image QualityLayout/Edit AdvancedSetupProgramStatus 10/10/2010 10:10Off3 The machine starts scanning the original. Whenscanning is completed, the preview image appearson the panel.4 To change the quality or the layout, press [Cancel]or the Stop key. Change the settings and press[Preview] again to see a preview image with thenew settings.NOTE: If you scan a multi-page original, only the firstpage is previewed.5 If there is no problem with the preview image, pressthe Start key. Copying begins.3-6