user manual - Utax

Default Setting (System Menu)Original OrientationSet the original orientation defaults. The available default settings are shown below.ItemTop Edge on TopTop Edge on LeftDescriptionSelect the original's top edge at the top.Select the original's top edge at the left.Refer to page 4-9 for Original Orientation.Use the procedure below to select the default orientation when originals are placed on the platen.1 Press the System Menu key.2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Original Orientation.3 Select [Top Edge on Top] or [Top Edge on Left] for the default.4 Press [OK].Original Image (Copy)Select the default original document type for copying. The available default settings are shown below.ItemText+Photo (Printer)Text+Photo (Magazine)Photo (Printer)Photo (Magazine)Photo (Photo Paper)TextText (Fine Line)Graphic/Map (Printer)Graphic/Map (Magazine)DescriptionFor mixed text and photo documents printed on this machineoriginally.For mixed text and photos printed in a magazine, etc.For photos printed on this machine originally.For photos printed in a magazine, etc.For photos taken with a camera.Sharply renders pencil text and fine lines.For maps and diagrams printed on this machine originally.For maps and diagrams printed in a magazine.99-17