user manual - Utax

Default Setting (System Menu)WSD ScanSelect whether or not to use WSD Scan. The default setting is On.IMPORTANT: After changing the setting, restart the network from the system menu, or turn the machine OFFand then ON. For detailed information on restarting the network, refer to Restart Network on page 9-109.Use the procedure below.1 Press the System Menu key.2 Press [System], [Next] of Network and then [Change] of WSD Scan.3 Press [On] or [Off].4 Press [OK].WSD PrintSelect whether or not to use WSD Print. The default setting is On.IMPORTANT: After changing the setting, restart the network from the system menu, or turn the machine OFFand then ON. For detailed information on restarting the network, refer to Restart Network on page 9-109.Use the procedure below.1 Press the System Menu key.92 Press [System], [Next] of Network and then [Change] of WSD Print.3 Press [On] or [Off].4 Press [OK].Enhanced WSDSet whether to use our proprietary web services. The WIA driver, TWAIN driver, and Network FAX driver usethis Enhanced WSD Web service. The default setting is On.IMPORTANT: After changing the setting, restart the network from the system menu, or turn the machine OFFand then ON. For detailed information on restarting the network, refer to Restart Network on page 9-109.Use the procedure below.1 Press the System Menu key.2 Press [System], [Next] of Network and then [Change] of Enhanced WSD.3 Press [On] or [Off].4 Press [OK].9-103