user manual - Utax

Copying FunctionsEcoPrintUse EcoPrint to save toner when printing. Use this function for test copies or any other occasion where highquality print is unnecessary.The procedure for making copies using EcoPrint is explained below.1 Press the Copy key.2 Place the originals on the platen.3 Press [Color/Image Quality] and then [EcoPrint].Copies4 Press [On].EcoPrintOffOnToner Save LevelLow1 2 3 4 5High5 Press [1] to [5] (Low - High) to adjust the TonerSave Level.6 Press [OK].OriginalZoomPaper: A4: 100%: A4PreviewAdd ShortcutCancelOKStatus10/10/2010 10:107 Press the Start key to start copying.Single ColorSpecify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies with that color regardless oforiginal type.Follow the steps shown below for Single Color Copy.1 Press the Copy key.2 Place the originals on the platen.3 Press [Color/Image Quality], [Color Selection] andthen press [Single Color].Copies4 Select color for copying from [Cyan], [Magenta],[Yellow], [Red], [Green] or [Blue].Color SelectionAuto ColorSingle Color5 Press [OK].Full ColorCyanMagentaYellowBlack &WhiteOriginalZoomPaper: A4: 100%: A4Single ColorRedGreenBluePreviewAdd ShortcutCancelOKStatus10/10/2010 10:106 Press the Start key. Copying begins.4-34