user manual - Utax

Default Setting (System Menu)Orientation ConfirmationSelect whether to display a screen for selecting the orientation of the originals to be placed on the platen whenusing the following functions. (For more information, refer to page 4-9 for Original Orientation.)• Zoom (XY Zoom) • Page numbering• Duplex • Booklets• Margin/Centering originals • Staple/Punch (optional feature)• Border erase • 2-sided/Book Original• Combine mode • Text Stamp• Memo mode • Bates StampUse the procedure below to select the default Orientation Confirmation setting.1 Press the System Menu key.2 Press [Common Settings] and [Change] of Orientation Confirmation.3 Select the default for [Off] or [On].4 Press [OK].Color Toner Empty ActionSelect whether printing is prohibited or the Print in Black and White setting is used for printing once the colortoner runs out.Use the procedure below to specify the action performed when there is no color toner.1 Press the System Menu key.2 Press [Common Settings], [ ] and then [Change] of Color Toner Empty Action.3 Select [Stop Printing] or [Print in Black & White].4 Press [OK].IMPORTANT: You cannot change the setting to black and white printing by selecting [Print in Black & White]once the color toner runs out. If you want to use [Print in Black & White], specify the action before the color tonerruns out.Once the color toner runs out, the machine continues printing in black and white up to 2,000 pages in A4/Lettersize.Function DefaultsDefaults are the values automatically set after the warm-up is completed or the Reset key is pressed.Set the defaults for available settings such as copying and sending. Setting the frequently-used values asdefaults makes subsequent jobs easier.IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and pressthe Reset key.9-16