user manual - Utax

Default Setting (System Menu)File FormatSelect the default file type to send the scanned originals. The available default settings are shown below.ItemDescriptionPDFTIFFJPEGXPSSend files in PDF format.Send files in TIFF format.Send files in JPEG format.Send files in XPS format.High Comp. PDF Send files in High Comp. PDF format (refer to page 6-16).NOTE: Refer to page 6-14 for file formats.Use the procedure below to select the default file format.1 Press the System Menu key.2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of File Format.3 Select the default file format.4 Press [OK].File SeparationSelect the default file separation setting. The available default settings are shown below.ItemDescriptionOffEach PageNo file separation performed (all the pages are compiled in one file).Each scanned page is created into a separate file.NOTE: Refer to page 6-15 for file separation.Use the procedure below to select the default file separation.1 Press the System Menu key.2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of File Separation.3 Select the default for [Off] or [Each Page].4 Press [OK].9-20