user manual - Utax

Basic OperationNOTE: When selecting [On] for Entry Check for NewDestination (page 9-49), the confirmation screenappears. Enter the same destination again and press[OK].When selecting [On] for Destination Check before Send(page 9-48), the confirmation screen appears afterpressing the Start key. For details, refer to ConfirmationScreen of Destinations on page 3-29.38 Press the Start key. Sending begins.Send to Folder (Folder Path Entry)Stores a scanned original image file in the specified shared folder of any PC.Stores a scanned original image in a folder of an FTP server.NOTE:• Refer to Creating a Shared Folder on page 3-32 for details on how to share a folder.• Be sure that SMB Protocol or FTP in the Embedded Web Server RX is On. For details, refer to theEmbedded Web Server RX Operation Guide.1 Press the Send key.Displays the screen for sending.NOTE: Depending on the settings, the address bookscreen may appear. In this event, press [Cancel] todisplay the screen for sending.2 Place the originals on the platen.3 Press [Folder Path Entry] and then [SMB] or [FTP].NOTE: Destinations can be specified using theAddress Book or the One Touch Keys. For details, referto Specifying Destination on page 3-40.3-25