user manual - Utax

Management4 Press [Next] of User Login Setting, [Change] ofObtain NW User Property.User Login/Job Accounting - Obtain NW User Property5 Press [On].OffOnGet the network user information.LDAP Server Information:Server NameName 1Name 2E-mailAddressPort:192.181.11.11389Acquisition of User Information:displayNamemail# KeysCancelSimpleAuthenticatType30 sec.SearchTimeoutOffLDAPSecurityOK6 Press [Server Name].7 Enter the LDAP server name or the IP address andpress [OK].8 Press [# keys] to enter the LDAP port number usingthe numeric keys.9 Press [Name 1].Status10/10/2010 10:1010 Enter the LDAP Attribute to obtain the user name tobe displayed and press [OK].11 Follow steps 9 and 10 above to set [Name 2].12 Press [E-mail Address].13 Enter the LDAP Attribute to obtain the e-mailaddress and press [OK].14 If you set the server type to [Kerberos], press[Authentication Type] and set the authenticationmethod.15 Press [Search Timeout] to set the amount of time towait before time-out.16 Press [+], [-] or the numeric keys to enter the timeand press [OK].17 Press [LDAP Security] to select the type ofencryption according to the type of securityemployed by the LDAP server.18 Select [Off], [SSL/TLS], or [STARTTLS] and press[OK].10-16