user manual - Utax

Basic OperationSend as E-mail (E-mail Addr Entry)Sends a scanned original image as an E-mail attachment.NOTE: Access the Embedded Web Server RX beforehand and specify the settings required for sending e-mail. For details, see Embedded Web Server RX (Settings for E-mail) on page 2-26.1 Press the Send key.Displays the screen for sending.NOTE: Depending on the settings, the address bookscreen may appear. In this event, press [Cancel] todisplay the screen for sending.2 Place the originals on the platen.Enter Destination.E-mail Address EntryDestination3 Press [E-mail Addr Entry] and then [E-mailAddress].E-mailAddressAdd a new e-mail destination.Press [E-mail Address], then enterthe address using the keyboard screen.NOTE: Destinations can be specified using theAddress Book or the One Touch Keys. Refer toSpecifying Destination on page 3-40.Add to Addr BookNext Dest.CancelOKStatus10/10/2010 10:104 Enter destination E-mail address and press [OK].5 Press [Next Dest.] and repeat step 3 to specify thedestination. Up to 100 e-mail addresses can bespecified.NOTE: When [Add to Addr Book] is displayed, thedestinations are registered in the Address Book.6 Press [OK]. The destinations are registered in thedestination list.On HookDestinationABCDDetailabcd@efg.comTUVW 192.168.188.120Group1Group1DirectChainDetail/Edit Delete Recall0001 00020003 0004 0005AAA BBB CCC DDDEEE1/1No.DestinationAddressBookE-mailAddr EntryFolder PathEntryFAX No.Entryi-FAXAddr Entry7 Check the destination list.Select a destination and press [Detail/Edit] to checkand edit it.Select a destination and press [Delete] to removethe destination from the list.0006 0007 0008 0009 0010FFF GGG HHH III JJJ1/100WSD Scan/DSM ScanDestinationQuick SetupOrg./SendingData FormatColor/Image QualityAdvancedSetupProgramStatus10/10/2010 10:103-24