user manual - Utax

Default Setting (System Menu)System StampThe following header, footer, and stamp settings can be selected in System Stamp Settings.• Basic• Printing Jobs• Sending Jobs• Storing JobsBasicSelect displayed stamp settings.Text (Text Stamp)Set a Text (Text Stamp). The text set here can be selected as a stamp template during sending.Use the procedure below to set a Text (Text Stamp).1 Press the System Menu key.2 Press [Common Settings] > [ ] > [Next] in System Stamp > [Next] in Basic > [Add/Edit] in Text (TextStamp).3 Select the key in which the print text will be registered, press [Add/Edit], and enter a maximum of 32characters for the text string.4 Press [OK].Font (Page #)When page numbers are used, set the font sizes that can be set.Use the procedure below to set a Font (Page #).91 Press the System Menu key.2 Press [Common Settings] > [ ] > [Next] in System Stamp > [Next] in Basic > [Next] in Font (Page #).3 Press [Change] in Size 1 - Size 3, and set the font size.4 Press [OK].Font (Bates Stamp)When a bates stamp is used, set the font sizes that can be set.Use the procedure below to set a Font (Bates Stamp).1 Press the System Menu key.2 Press [Common Settings] > [ ] > [Next] in System Stamp > [Next] in Basic > [Next] in Font (Bates Stamp).3 Press [Change] in Size 1 - Size 3, and set the font size.4 Press [OK].9-31