R 1200 CL
R 1200 CL
R 1200 CL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
R <strong>1200</strong> <strong>CL</strong><br />
Alarm System Programming Information<br />
Programming Procedure<br />
The alarm system is designed for 12 programmable functions. However, only 5<br />
functions are currently available (beeping tone, panic alarm, tone type and automatic<br />
activation of the starter immobilizer and automatic arming of the alarm).<br />
The other channels are free channels and must be<br />
skipped by pressing either button A or B during the<br />
process.<br />
Follow the chart below and press either button A or<br />
B to select the function you want active. All channels<br />
must be programmed in the following<br />
sequence by pressing either button A or B on the<br />
remote:<br />
R <strong>1200</strong> <strong>CL</strong> Introduction<br />
After the selecting channel<br />
12, programming is completed<br />
and indicated by<br />
three consecutive beeps.<br />
• Turn off the ignition.<br />
• Wait for the control LED<br />
to flash, the system is<br />
now armed.<br />
• DisArm the alarm system<br />
by pressing button A.<br />
Programming procedure is<br />
now completed.<br />
123