R 1200 CL
R 1200 CL
R 1200 CL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R <strong>1200</strong> <strong>CL</strong><br />
Chassis and Wheels<br />
The rear frame section is welded together<br />
by a combination of tubular, cast and forged<br />
steel components. The frame is then paint<br />
finish coated.<br />
Cast steel bearings for supporting the foot<br />
pegs of the rider and pillion are welded to<br />
the frame. They are attached to the engine<br />
in the area of the longitudinal control arm<br />
bearing, the oil pan and on the considerably<br />
reinforced light metal-gearbox case.<br />
18<br />
Tail Frame Section<br />
Due to the longer seat system and the addition<br />
of the top case, the rear frame is<br />
lengthened accordingly. The side cases are<br />
mounted to tubular frame extensions providing<br />
a screw mounting point.The left side<br />
extension is removable for tire service by<br />
removing four screws.<br />
Front Wheel<br />
R <strong>1200</strong> <strong>CL</strong> Introduction
Change language