R 1200 CL
R 1200 CL
R 1200 CL
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
R <strong>1200</strong> <strong>CL</strong><br />
BMW Inspection I Procedures (600 Miles)<br />
Changing rear drive oil<br />
BMW inspections/services I, III, IV<br />
• Unscrew oil filler plug and oil drain<br />
plug/drain oil.<br />
• Screw in oil drain plug with new<br />
sealing ring.<br />
• Fill with transmission oil.<br />
• Screw in oil filler plug with new sealing<br />
ring.<br />
Check throttle cables for kinks,<br />
abrasion and verify smooth operation<br />
- replace if necessary<br />
BMW inspections/services I, II, III, IV<br />
• Inspect cables for external wear or<br />
breaks in casing from rubbing on<br />
other components.<br />
• Turn handlebars to full lock left and<br />
right while operating throttle twist<br />
grip. If abnormalities in “twist grip<br />
feel” are present, determine location<br />
of binding and repair.<br />
• Ensure throttle twist grip “snaps”<br />
back to closed position when held<br />
in open position and released.<br />
• Do not lubricate cables! They are<br />
designed to operate dry.<br />
72<br />
Rear Drive Oil Change<br />
Filling capacity:<br />
Rear wheel drive up to bottom edge<br />
of filler opening 0.25 Liter<br />
Transmission oil grade:<br />
Brand-name Hypoid gear oil of SAE<br />
90 API Class GL 5<br />
Tightening torque:<br />
Oil drain plug, 23 Nm (17 ft. lb.)<br />
Oil filler plug, 23 Nm (17 ft. lb.)<br />
R <strong>1200</strong> <strong>CL</strong> Introduction
Change language