R 1200 CL
R 1200 CL
R 1200 CL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R <strong>1200</strong> <strong>CL</strong><br />
BMW Inspection I Procedures (600 Miles)<br />
Changing Engine Oil & Filter<br />
BMW inspections/services I, II, III, IV<br />
Note: Drain oil with engine at operating<br />
temperature.<br />
• Remove fill plug.<br />
• Unscrew oil drain plug & drain oil.<br />
• Fit oil drain screw plug with new<br />
sealing ring.<br />
• Using oil filter wrench, P/N 88 88 6<br />
11 4 650, unscrew oil filter.<br />
• Coat sealing ring of new oil filter<br />
with oil and screw in.<br />
• Fill the new oil filter with oil and,<br />
install.<br />
• Recheck oil level approx. 10 minutes<br />
after test run.<br />
Important: Never top up engine oil<br />
above ‘MAX’ mark.<br />
R <strong>1200</strong> <strong>CL</strong> Introduction<br />
Change Engine Oil and Filter<br />
Add new to proper level (do not overfill)<br />
Filling capacity, engine:<br />
With oil filter change 4 qt.<br />
Without filter change 3.7 qt.<br />
Oil capacity between min and max<br />
marks app. 0.5 liter (.53 qt)<br />
Tightening torque:<br />
Oil filter 11 Nm (8 ft. lb.)<br />
Oil drain plug 32 Nm (23 ft. lb.)<br />
Engine oil grades:<br />
Brand-name HD oil for petrol engines of<br />
API classification SG/SH<br />
71
Change language