R 1200 CL
R 1200 CL
R 1200 CL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R <strong>1200</strong> <strong>CL</strong><br />
BMW Inspection I Procedures (600 Miles)<br />
Check throttle synchronization values<br />
with MoDiTeC<br />
BMW inspections/services I, II, III, IV<br />
Note: The R <strong>1200</strong> <strong>CL</strong> has a common<br />
throttle linkage system and an Idle<br />
Control management feature of<br />
Motronic. These two features have<br />
deemed the throttle synchronization<br />
useless on the R <strong>1200</strong> C/<strong>CL</strong> models.<br />
However, as a measure of quality service,<br />
the throttle sync should be<br />
checked solely to ensure the system is<br />
free of air leaks that could lead to<br />
engine poor performance issues and<br />
customer dissatisfaction.<br />
• Connect Synchro unit to intake vacuum<br />
ports and MoDiTeC.<br />
• Engine should not run longer than<br />
10 minutes while stationary. Have a<br />
fan running to cool engine. Do not<br />
leave unattended.<br />
• The max difference should not<br />
exceed 0.3 bar as displayed by<br />
MoDiTeC.<br />
If excessive difference is present, it is<br />
most likely an intake air leak which<br />
must be repaired.<br />
R <strong>1200</strong> <strong>CL</strong> Introduction<br />
Throttle Synchronization Test<br />
75