R 1200 CL
R 1200 CL
R 1200 CL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R <strong>1200</strong> <strong>CL</strong><br />
PDI Procedures - Uncrating<br />
Lever off top cover and minimize for easy handling<br />
44<br />
Remove top plastic bag<br />
Carefully lever out top supports<br />
Uncrating the motorcycle<br />
• With the crate on a level surface,<br />
remove the top cover by levering it<br />
off with a pry bar.<br />
Hint: Place the crate top on the<br />
edge of the crate frame and snap it<br />
in half. This will make handling the<br />
cover more manageable.<br />
• Remove the plastic bag suspended<br />
between the crate lateral supports.<br />
Set the bag aside in a safe place.<br />
• Remove the antenna from right side<br />
crate support.<br />
• Pry or cut the lateral supports out<br />
from the top of the crate as shown.<br />
• Using a suitable saw such as a<br />
reciprocating saw (Sawzall TM ), carefully<br />
cut the sides of the crate<br />
where they attached to the end<br />
panels.<br />
• Do this on both sides of the crate<br />
(total of 8 cuts).<br />
Cut crate in 8 locations as shown (both sides)<br />
R <strong>1200</strong> <strong>CL</strong> Introduction
Change language