R <strong>1200</strong> <strong>CL</strong> 600 Mile Inspection Procedures Note: This manual only includes the 600 Mile Service Procedures solely as an introduction convenience. For complete service maintenance procedures, always refer to the official factory service manual. Repair Manuals for all current models are located in MTAS, http://www.bmwmc.net (Aftersales> Service>Technical Information). Key to maintenance intervals Maintenance tasks consist of the first Inspection (after the first 1,000 km/600 miles), the BMW Service, BMW Inspection and BMW Annual Service. Inspection 1,000 km (600 miles) BMW Running-in Check after the first 1,000 km (600 miles). BMW Service After the first 10,000 km (6,000 miles) and each additional 20,000 km (12,000 miles) (at 30,000 km ... 50,000 km ... 70,000 km) (at 18,000 miles ... 30,000 miles ... 42,000 miles). BMW Inspection After the first 20,000 km (12,000 miles) and each additional 20,000 km (12,000 miles) (at 40,000 km ... 60,000 km ... 80,000 km) (at 24,000 miles ... 36,000 miles ... 48,000 miles). BMW Annual Service Certain maintenance tasks depend on elapsed time as well as the distance the motorcycle has covered.They should therefore be carried out at least once a year (e. g. changing brake fluid). If these tasks cannot be carried out during a Service or an Inspection, a BMW Annual Service must be performed. 64 Maintenance Schedule Checklist In this Repair Manual, the individual maintenance intervals are shown by the following codes: — Inspection at 1,000 km (600 miles)......................I — BMW Service at 10,000 km (6,000 miles)...........II — BMW Inspection at 20,000 km (12,000 miles) .. III — BMW Annual Service........................................ IV • The Maintenance Schedule Checklist is used to make sure all the maintenance is carried out at the proper time. The checklists are displayed on pages 66 and 67 to alert you of new procedures necessary on the R <strong>1200</strong> <strong>CL</strong>. • All current model Maintenance Schedule Checklists are accessed online from the MTAS (Aftersales> Service> Technical Information). As a time saving tip, print out multiple copies and store them for readiness. R <strong>1200</strong> <strong>CL</strong> Introduction
R <strong>1200</strong> <strong>CL</strong> US Market Service Lubricants, Sealants and Thread Lockers R <strong>1200</strong> <strong>CL</strong> Introduction 65